Platen cutting line

1000 Series Platen Die Cutting Lines
 

Overview

1000 Series Platen Die Cutting Lines
 

Specification

Specifications
Narrow Web Cutter Line – 1000 FPM | Wide Web Cutter Line – 1000 FPM
Maximum Web Width:
22″ (559mm) 26″ (660mm) 32″ (813mm) | 40″ (1016mm) 48″ (1219mm) 55″ (1397mm)
Minimum Web Width:
11″ (279mm) 13″ (330mm) 16″ (406mm) | 20″ (508mm) 24″ (610mm) 27″ (686mm)
Maximum Cutoff:
30″ (762mm) 30″ (762mm) 30″ (762mm) | 40″ (1016mm) 40″ (1016mm) 40″ (1016mm)
Maximum Cutting Load:
400,000 LBS. 450,000 LBS. 500,000 LBS. | 1,000,000 LBS. 1,250,000 LBS. 1,500,000 LBS.
Maximum Cut/Crease Rule:
725″ (18,415mm) 820″ (20,828mm) 900″ (22,860mm) | 1800″ (45,720mm) 2270″ (57,658mm) 2700″ (65,580mm)
Substrate Thickness:
.010″ – .030″ (.25-.75mm) | .010″ – .040″ (.25-1.00mm)
Print To Cut Registration:
+/-.006″ (+/- .15mm)
Register Control System:
Zerand or other suitable commercial registration system.
Maximum Speed:
1000 FPM (305 MPM)
Maximum Impressions:
450 IPM 450 IPM 450 IPM | 425 IPM 425 IPM 425 IPM
Blank Lenght:
3.5” (89 mm) to 40” (1,016 mm)
Blank Width:
90 mm to full sheet (Standard Belts)
70 mm to full sheet (Narrow Belts)
Number of Lanes Across:
Varies
Mazimum Stack Height:
6", 9", 12", 14" 16" (150 mm, 230 mm, 300 mm, 350 mm, 400 mm)
Depending on Stacker Selection

Features

Zerand builds on engineering expertise to create platen die cutters that are considered the best in the world. Designed for high-speed, high-volume non-stop operation, our custom-engineered die cutters will exceed your expectations for both precision and productivity.

Our 1000 Series cutters are rated up to 1000 FPM (305 MPM) • 450 IPM depending on model. These systems perform with unyielding precision. Motorized adjustments make them operator-friendly.

The strippers’ user-friendly, motorized adjustments deliver easy, precise performance. Predrilling the removable pin cylinder off-line allows you to reduce changeover time.

Key Advantages include:
  • Fast changeover attributed to the following available features:
    1. Auto-setup of the complete line
    2. Quick Tool Change for the cutter, stripper, belt askew and stacker
  • Roll to Blank to Stack, reducing plant storage and logistics, easily interfaces with palletizing systems
  • Customizable design
  • Latest generation ELS technology – Bosch Rexroth Indramat
  • Original spare parts and in house service
  • Low tooling cost
  • Low scrap rate